Services
UV, chemical control and dosing.
Third-party-validated UV (NSF/ANSI 50 or US EPA UVDGM), controllers that measure free chlorine rather than ORP, the dosing equipment they drive, and the output card that feeds your log — specified with your consultant, supplied through your pool contractor. Brand details on request.
What we supply
- UV — medium-pressure units for public pools and interactive features; low-pressure units where the validated flow and the engineer allow. Every unit comes with its third-party validation certificate and flow-versus-UVT table.
- Control — amperometric free-chlorine measurement, pH, total chlorine for combined-chlorine logging, temperature; 4–20 mA or Modbus outputs so the log is independent of the controller.
- Dosing — metering pumps driven by the controller's 4–20 mA or pulse output (solenoid or peristaltic, pool-rated), chemical tanks and bunds sized to the AS 3780 and WHS storage rules, radar level monitoring that feeds the log, and CO2 pH correction where the facility prefers it to acid.
- Spares — lamps, sleeves, sensors, probes, held in Australia.
How it is bought
Through your pool contractor's bill of materials, installed by licensed trades and commissioned with the manufacturer's application engineers. We don't sell direct around your contractor.
One loop
Disinfection, control and dosing are one plant-room scope: the controller measures free chlorine, drives the pumps, signals the UV, and everything lands in the same log. We specify, supply and commission that loop as one. Filtration and circulation stay with your existing contractor; we work alongside them.
Why validated
The 2026 Guidelines say UV "should be validated". Manufacturer test reports are not validation; NSF/ANSI 50 listings and UVDGM bioassays are. We only supply the second kind.
Tell us about your plant room
One email with the facility type, number of pools and what controls the chemistry today is enough to start.